The OMNI Powered 2.5 BAR MAP sensor is 100% plug and play! Meaning there is no need for throttle body adapters, or harness adapters. With a Philips screw driver, you can have this installed in 2 minutes!
An upgraded MAP sensor is required when supercharging or turbocharging your FR-S / BRZ. A tune is required after installation of this part.
The 2.5 Bar MAP sensor uses state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip. Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes.
The unique ability to compensate for temperature changes allows the sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors.
PERRIN Performance warrants to the original purchaser that the OMNI 2.5 Bar MAP Sensor will be free from defects in material and workmanship.
*Some exclusions apply
» Read Full Warranty
This product is legal in California only for racing vehicles which may never be used upon a highway. Check your local and federal laws prior to installation!
» Learn More
This product features a (12) month Warranty Read Full Warranty
In The Box
|(1) OMNI Powered 2.5 Bar MAP sensor|