WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
K&N Synthetic Air Filter Cleaner loosens and dissolves dirt and grime build up on synthetic filters so they can be rinsed clean with water. This cleaner is perfect for Dryflow air filters and other synthetic air filters. Cleaner comes in a 32 oz. spray bottle.
REMOVE FILTER: Remove filter from the intake pipe and lightly tap off all loose dirt and debris.
APPLY CLEANER: Liberally spray Dryflow cleaner onto both sides of the filter, with the majority of it applied to the dirty side. Allow to soak in for 10 minutes. Do not allow it to dry on the air filter.
RINSE FILTER: Rinse off the filter element with cool or warm (not hot) water from the clean side out in order to flush the dirt out of the filter. It may be necessary to use your fingers on the hose, to apply light water pressure. Repeat steps 2 and 3, until the water flowing through the media is completely clear of any dirt and debris.
DRY AND RE-INSTALL FILTER: After rinsing, gently shake off excessive water and allow to dry naturally or carefully use compressed air to help speed the drying cycle. Re-install the filter onto the intake system, airbox or custom assembly once it is dry or just slightly damp. Follow all original installation instructions.
In The Box
|(1) 32 oz. Dryflow Filter Cleaner|