Additional Images

Front Mount Intercooler for EVO X

PEPENG405

3 Hours

Was: $999.99
Sale: $750.00
Save: 25%
Save: $249.99
Qty:

Description

Front Mount Intercooler

A key to making more power on any turbocharged engine is the addition of a high performance air-to-air intercooler. This part in the simplest of terms, cools the air going from the turbo into your engine, much the same as a radiator cools the water inside the engine, by transferring the excess heat way using multiple passages through a core. A PERRIN intercooler fits easily to the front of your Subaru to maximize cooling.

Intercooler Core

The PERRIN intercooler core is designed to our specs, specifically for your high horsepower EVO X. The PERRIN bar and plate core design is much more durable than weaker/thinner tube and fin (OEM style) with the ability to withstand rocks and other debris, which is important when mounted on the front of a car. You can see how small and restrictive the charge side tubes on the stock intercooler are compared to our massive 3/8" channels. This is one of the reasons our intercooler makes more power, by being less restrictive.

Cast Endtanks

The PERRIN Performance designed endtanks control the dispersal of hot air across the entire intercooler core. With no 90 degree corners and a smoother, gradual taper from top to bottom this ensures the highest flow possible. Each endtank has OEM type mounting brackets built onto them to solidly mount the intercooler to the chassis.

Pressure Testing

PERRIN Performance is one of the only intercooler manufactures who pressure tests every intercooler. We pressurize every intercooler to 50 psi. on our specially designed jigs to ensure safe repeatable results. Even the slightest leak can cause your vehicle to loose power, literally bleeding turbo boost pressure out the intercooler.

T-bolt Clamps

T-bolt clamp are standard on PERRIN intercoolers. They are designed for uniform clamping at all points around the band. The wider band distributes the force over a larger area and the Fine threaded bolts with nylon lock nuts allow for accurate torque and proper clamping. Never re-tighten down the road, plus each clamp is made in the USA and has the torque spec engraved on each one. 

Finish

Every PERRIN intercooler is powder coated further protecting your intercooler from the elements making it look awesome for years to come. Available with either a black or silver powder coating.

PERRIN Stencils

Included with our front mount intercooler is a free PERRIN logged intercooler stencil. Use the stencil to easily paint the PERRIN logo across the front of your intercooler. Simply peel, stick, paint, and remove.

Installed Photos

Click on the photo to the left to view a slideshow of this part and other like parts installed.

5 Year Warranty

PERRIN Performance warrants to the original purchaser, all PERRIN products to be free from defects in material and workmanship within a sixty (60) months period from the date of purchase. *Some exclusions apply
» Read Full Warranty

Off Road Use Only

This product is legal in California only for racing vehicles which may never be used upon a highway. Check your local and federal laws prior to installation.
» Learn More

Support

Download Instructions


Warranty Details

This product features a 5 year warranty Read Full Warranty


Tech Department

Email:

In The Box

In The Box

(1) Mitsubishi EVO X Front Mount Intercooler
(2) PERRIN Silicone Couplers
(4) PERRIN T-Bolt Clamps
(1) PERRIN Stencil
(1) PERRIN License Plate Frame
Warranty

Dyno Charts

Dyno Charts

Proven Horse Power


Dyno Chart

Stage 2 vs. Stage 2 with Intercooler

This test was done on our shop GSR that was in Stage 2 form. This means it had our 3" turboback exhaust installed along with ECU tuning which increases boost in itself. We did a few runs, then installed the PERRIN larger Intercooler and these are the gains we saw. What is most noticeable is how run to run the car was happier and didn't loose power compared to the stock intercooler.

Compatibility Notes

Compatibility

Mitsubishi EVO X GSR Yes
2008-2013 Mitsubishi EVO X MR Yes
Mitsubishi EVO 8/9 No, this is the Mitsubishi EVO 8/9 Intercooler
Ralliart No

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 34.0 lbs.
  • W10.0000” x H18.0000” x L38.0000”